高级算法 (Fall 2016)/Greedy and Local Search: Difference between revisions

From TCS Wiki
Jump to navigation Jump to search
imported>Etone
imported>Etone
Line 214: Line 214:


{{Theorem|Minimum Makespan on Identical Parallel Machines (load balancing version)|
{{Theorem|Minimum Makespan on Identical Parallel Machines (load balancing version)|
:'''Instance''': <math>n</math> jobs <math>j=1,2,\ldot, n</math>, each with processing time <math>p_j\in\mathbb{Z}^+</math>;
:'''Input''': <math>n</math> jobs <math>j=1,2,\ldots, n</math>, each with processing time <math>p_j\in\mathbb{Z}^+</math>;
:'''Solution''':
:'''Output''':
}}
}}



Revision as of 16:08, 26 September 2016

Under construction. 

Set cover

Given [math]\displaystyle{ m }[/math] subsets [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] of a universe [math]\displaystyle{ U }[/math] of size [math]\displaystyle{ n=|U| }[/math], a [math]\displaystyle{ C\subseteq\{1,2,\ldots,m\} }[/math] forms a set cover if [math]\displaystyle{ U=\bigcup_{i\in\mathcal{C}}S_i }[/math], that is, [math]\displaystyle{ C }[/math] is a sub-collection of sets whose union "covers" all elements in the universe.

Without loss of generality, we always assume that the universe is [math]\displaystyle{ U==\bigcup_{i=1}^mS_i }[/math].

This defines an important optimization problem:

Set Cover Problem
  • Input: [math]\displaystyle{ m }[/math] subsets [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] of a universe [math]\displaystyle{ U }[/math] of size [math]\displaystyle{ n }[/math];
  • Output: the smallest [math]\displaystyle{ C\subseteq\{1,2,\ldots,m\} }[/math] such that [math]\displaystyle{ U=\bigcup_{i\in C}S_i }[/math].

We can think of each instance as a bipartite graph [math]\displaystyle{ G(U,\{S_1,S_2,\ldots,S_n\}, E) }[/math] with [math]\displaystyle{ n }[/math] vertices on the right side, each corresponding to an element [math]\displaystyle{ x\in U }[/math], [math]\displaystyle{ m }[/math] vertices on the left side, each corresponding to one of the [math]\displaystyle{ m }[/math] subsets [math]\displaystyle{ S_1,S_2,\ldots,S_m }[/math], and there is a bipartite edge connecting [math]\displaystyle{ x }[/math] with [math]\displaystyle{ S_i }[/math] if and only if [math]\displaystyle{ x\in S_i }[/math]. By this translation the set cover problem is precisely the problem of given as input a bipartite graph [math]\displaystyle{ G(U,V,E) }[/math], to find the smallest subset [math]\displaystyle{ C\subseteq V }[/math] of vertices on the right side to "cover" all vertices on the left side, such that every vertex on the left side [math]\displaystyle{ x\in U }[/math] is incident to some vertex in [math]\displaystyle{ C }[/math].

By alternating the roles of sets and elements in the above interpretation of set cover instances as bipartite graphs, the set cover problem can be translated to the following equivalent hitting set problem:

Hitting Set Problem
  • Input: [math]\displaystyle{ n }[/math] subsets [math]\displaystyle{ S_1,S_2,\ldots,S_n\subseteq U }[/math] of a universe [math]\displaystyle{ U }[/math] of size [math]\displaystyle{ m }[/math];
  • Output: the smallest subset [math]\displaystyle{ C\subseteq U }[/math] of elements such that [math]\displaystyle{ C }[/math] intersects with every set [math]\displaystyle{ S_i }[/math] for [math]\displaystyle{ 1\le i\le n }[/math].

Frequency and Vertex Cover

Given an instance of set cover problem [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math], for every element [math]\displaystyle{ x\in U }[/math], its frequency, denoted as [math]\displaystyle{ frequency(x) }[/math], is defined as the number of sets containing [math]\displaystyle{ X }[/math]. Formally,

[math]\displaystyle{ frequency(x)=|\{i\mid x\in S_i\}| }[/math].

In the hitting set version, the frequency should be defined for each set: for a set [math]\displaystyle{ S_i }[/math] its frequency [math]\displaystyle{ frequency(S_i)=|S_i| }[/math] is just the size of the set [math]\displaystyle{ S_i }[/math].

The set cover problem restricted to the instances with frequency 2 becomes the vertex cover problem.

Given an undirected graph [math]\displaystyle{ G(U,V) }[/math], a vertex cover is a subset [math]\displaystyle{ C\subseteq V }[/math] of vertices such that every edge [math]\displaystyle{ uv\in E }[/math] has at least one endpoint in [math]\displaystyle{ C }[/math].

Vertex Cover Problem
  • Input: an undirected graph [math]\displaystyle{ G(V,E) }[/math]
  • Output: the smallest [math]\displaystyle{ C\subseteq V }[/math] such that every edge [math]\displaystyle{ e\in E }[/math] is incident to at least one vertex in [math]\displaystyle{ C }[/math].

It is easy to compare with the hitting set problem:

  • For graph [math]\displaystyle{ G(V,E) }[/math], its edges [math]\displaystyle{ e_1,e_2,\ldots,e_n\subseteq V }[/math] are vertex-sets of size 2.
  • A subset [math]\displaystyle{ C\subseteq V }[/math] of vertices is a vertex cover if and only if it is a hitting sets for [math]\displaystyle{ e_1,e_2,\ldots,e_n }[/math], i.e. every [math]\displaystyle{ e_i }[/math] intersects with [math]\displaystyle{ C }[/math].

Therefore vertex cover is just set cover with frequency 2.

The vertex cover problem is NP-hard. Its decision version is among Karp's 21 NP-complete problems. Since vertex cover is a special case of set cover, the set cover problem is also NP-hard.

Greedy Algorithm

We present our algorithms in the original set cover setting (instead of the hitting set version).

A natural algorithm is the greedy algorithm: sequentially add such [math]\displaystyle{ i }[/math] to the cover [math]\displaystyle{ C }[/math], where each [math]\displaystyle{ S_i }[/math] covers the largest number of currently uncovered elements, until no element is left uncovered.

GreedyCover
Input: sets [math]\displaystyle{ S_1,S_2,\ldots,S_m }[/math];

initially, [math]\displaystyle{ U=\bigcup_{i=1}^mS_i }[/math], and [math]\displaystyle{ C=\emptyset }[/math];
while [math]\displaystyle{ U\neq\emptyset }[/math] do
find [math]\displaystyle{ i\in\{1,2,\ldots, m\} }[/math] with the largest [math]\displaystyle{ |S_i\cap U| }[/math];
let [math]\displaystyle{ C=C\cup\{i\} }[/math] and [math]\displaystyle{ U=U\setminus S_i }[/math];
return [math]\displaystyle{ C }[/math];

Obviously the algorithm runs in polynomial time and always returns a set cover. We will then show how good the set cover returned by the algorithm compared to the optimal solution by analyzing its approximation ratio.

We define the following notations:

  • We enumerate all elements of the universe [math]\displaystyle{ U }[/math] as [math]\displaystyle{ x_1,x_2,\ldots,x_n }[/math], in the order in which they are covered in the algorithm.
  • For [math]\displaystyle{ t=1,2,\ldots }[/math], let [math]\displaystyle{ U_t }[/math] denote the set of uncovered elements in the beginning of the [math]\displaystyle{ t }[/math]-th iteration of the algorithm.
  • For the [math]\displaystyle{ k }[/math]-th element [math]\displaystyle{ x_k }[/math] covered, supposed that it is covered by [math]\displaystyle{ S_i }[/math] in the [math]\displaystyle{ t }[/math]-th iteration, define
[math]\displaystyle{ price(x_k)=\frac{1}{|S_i\cap U_t|} }[/math]
to be the average "price" to cover element [math]\displaystyle{ x_k }[/math] in the algorithm.

Observe that if [math]\displaystyle{ x_k }[/math] is covered by [math]\displaystyle{ S_i }[/math] in the [math]\displaystyle{ t }[/math]-th iteration, then there are precisely [math]\displaystyle{ |S_i\cap U_t| }[/math] elements, including [math]\displaystyle{ x_k }[/math], become covered in that iteration, and all these elements have price [math]\displaystyle{ 1/|S_i\cap U_t| }[/math]. Then it is easy to have the following lemma:

Lemma 1
For the set cover [math]\displaystyle{ C }[/math] returned by the algorithm, [math]\displaystyle{ |C|=\sum_{k=1}^nprice(x_k) }[/math].

This lemma connect the size of the returned set cover to the prices of elements. The next lemme connects the price of each element to the optimal solution.

Lemma 2
For each [math]\displaystyle{ x_k }[/math], [math]\displaystyle{ price(x_k)\le \frac{OPT}{n-k+1} }[/math], where [math]\displaystyle{ OPT }[/math] is the size of the optimal set cover.
Proof.

For an instance [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] with a universe of size [math]\displaystyle{ n=|U| }[/math], let [math]\displaystyle{ C^*\subseteq\{1,2,\ldots,m\} }[/math] denote an optimal set cover. Then

[math]\displaystyle{ U=\bigcup_{i\in C^*}S_i }[/math].

By averaging principle, there must be an [math]\displaystyle{ S_i }[/math] of size

[math]\displaystyle{ |S_i|\ge\frac{n}{|C^*|}=\frac{n}{OPT} }[/math].

By the greediness of the algorithm, in the first iteration the algorithm must choose a set [math]\displaystyle{ S_i }[/math] of at least this size to add to the set cover [math]\displaystyle{ C }[/math], which means the price the element covered at first, [math]\displaystyle{ x_1 }[/math], along with all elements covered in the first iteration, are priced as

[math]\displaystyle{ price(x_1)=\frac{1}{\max_{i}|S_i|}\le \frac{OPT}{n} }[/math].

For the [math]\displaystyle{ k }[/math]-th element covered by the algorithm, supposed that it is covered by in the [math]\displaystyle{ t }[/math]-th iteration, and the current universe for the uncovered elements is [math]\displaystyle{ U_t }[/math], it holds that

[math]\displaystyle{ |U_t|\le n-k+1 }[/math],

since there are at most [math]\displaystyle{ k-1 }[/math] elements covered before [math]\displaystyle{ x_k }[/math].

The uncovered elements constitutes a set cover instance [math]\displaystyle{ S_1\cap U_t, S_2\cap U_t, \ldots, S_m\cap U_t }[/math] (some of which may be empty), with universe [math]\displaystyle{ U_t }[/math]. Note that this smaller instance has an optimal set cover of size at most OPT (since the optimal solution for the original instance must also be an optimal solution for this smaller instance), and [math]\displaystyle{ x_k }[/math] is among the elements covered in the first iteration of the algorithm running on this smaller instance. By the above argument, it holds for the [math]\displaystyle{ price(x_k)=\frac{1}{|S_i\cap U_t|} }[/math] (also note that this value is not changed no matter as in the [math]\displaystyle{ t }[/math]-th integration of the algorithm running on the original instance or as in the first iteration of the algorithm on the smaller instance) that [math]\displaystyle{ price(x_k)=\frac{1}{|S_i\cap U_t|}\le\frac{OPT}{|U_t|}=\frac{OPT}{n-k+1}. }[/math] The lemma is proved.

[math]\displaystyle{ \square }[/math]


Combining Lemma 1 and Lemma 2, we have

[math]\displaystyle{ |C|=\sum_{k=1}^nprice(x_k) \le \sum_{k=1}^n \frac{OPT}{n-k+1}=\sum_{k=1}^n\frac{OPT}{k}=H_n\cdot OPT, }[/math]

where [math]\displaystyle{ H_n=\sum_{k=1}^n\frac{1}{k}\approx\ln n+O(1) }[/math] is the [math]\displaystyle{ n }[/math]-th Harmonic number.

This shows that the GreedyCover algorithm has approximation ratio [math]\displaystyle{ H_n\approx\ln n }[/math].

Theorem
For any set cover instance [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] with optimal set cover of size [math]\displaystyle{ OPT }[/math], the GreedyCover returns a set cover of size
[math]\displaystyle{ C\le H_n\cdot {OPT} }[/math],
where [math]\displaystyle{ n=|U| }[/math] is the size of the universe and [math]\displaystyle{ H_n\approx\ln n }[/math] represents the [math]\displaystyle{ n }[/math]-th Harmonic number.

Ignoring lower order terms, [math]\displaystyle{ \ln n }[/math] is also the best approximation ratio achievable by polynomial time algorithms, assuming that NP[math]\displaystyle{ neq }[/math]P.

  • Lund and Yannakakis (1994) showed that there is no poly-time algorithm with approximation ratio [math]\displaystyle{ \lt \frac{1}{2}\log_2 n }[/math], unless all NP problems have quasi-polynomial time algorithms (which runs in time [math]\displaystyle{ n^{\mathrm{polylog}(n)} }[/math]).
  • Feige (1998) showed that there is no poly-time algorithm with approximation ratio better than [math]\displaystyle{ (1-o(1))\ln n }[/math] with the same complexity assumption.
  • Ras and Safra (1997) showed that there is no poly-time algorithm with approximation ratio better than [math]\displaystyle{ c\ln n }[/math] for a constant [math]\displaystyle{ c }[/math] assuming that NP[math]\displaystyle{ \neq }[/math]P.
  • Dinur and Steurer (2014) showed that there is no poly-time algorithm with approximation ratio better than [math]\displaystyle{ (1-o(1))\ln n }[/math] assuming that NP[math]\displaystyle{ \neq }[/math]P.

Primal-Dual Algorithm

Given an instance [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] for set cover, the set cover problem asks for minimizing the size of [math]\displaystyle{ |C| }[/math] subject to the constraints that [math]\displaystyle{ C\subseteq\{1,2,\ldots, m\} }[/math] and [math]\displaystyle{ U=\bigcup_{i\in C}S_i }[/math], i.e. [math]\displaystyle{ C }[/math] is a set cover. We can define a dual problem on the same instance. The original problem, the set cover problem is called the primal problem. Formally, the primal and dual problems are defined as follows:

Primal:
minimize [math]\displaystyle{ |C| }[/math]
subject to [math]\displaystyle{ C\subseteq \{1,2,\ldots,m\} }[/math]
[math]\displaystyle{ U=\bigcup_{i\in C}S_i }[/math]
Dual:
maximize [math]\displaystyle{ |M| }[/math]
subject to [math]\displaystyle{ M\subseteq U }[/math]
[math]\displaystyle{ |S_i\cap M|\le 1 }[/math], [math]\displaystyle{ \forall 1\le i\le m }[/math]

The dual problem is a "maximum matching" problem, where the matching is defined for the set system instead of graph. Given an instance [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math], an [math]\displaystyle{ M\subseteq U }[/math] is called a matching for [math]\displaystyle{ S_1,S_2,\ldots,S_m }[/math] if [math]\displaystyle{ |S_i\cap M|\le 1 }[/math] for all [math]\displaystyle{ i=1,2,\ldots, m }[/math].

It is easier to see these two optimization problems are dual to each other if we write them as mathematical programs.

For the primal problem (set cover), for each [math]\displaystyle{ 1\le i\le m }[/math], let [math]\displaystyle{ x_i\in\{0,1\} }[/math] indicate whether [math]\displaystyle{ i\in C }[/math]. The set cover problem can be written as the following integer linear programming (ILP).

Primal:
minimize [math]\displaystyle{ \sum_{i=1}^m x_i }[/math]
subject to [math]\displaystyle{ \sum_{i:v\in S_i}x_i\ge 1 }[/math], [math]\displaystyle{ \forall v\in U }[/math]
[math]\displaystyle{ x_i\in\{0,1\} }[/math], [math]\displaystyle{ \forall 1\le i\le m }[/math]

For the dual problem (maximum matching), for each [math]\displaystyle{ v\in U }[/math], let [math]\displaystyle{ y_v\in\{0,1\} }[/math] indicate whether [math]\displaystyle{ v\in M }[/math]. Then the dual problem can be written as the following ILP.

Dual:
maximize [math]\displaystyle{ \sum_{v\in U}y_v }[/math]
subject to [math]\displaystyle{ \sum_{v\in S_i}y_v\le 1 }[/math], [math]\displaystyle{ \forall 1\le i\le m }[/math]
[math]\displaystyle{ y_v\in\{0,1\} }[/math], [math]\displaystyle{ \forall v\in U }[/math]

It is fundamental fact that for a minimization problem, every feasible solution to the dual problem (which is a maximization problem) is a lower bound for the optimal solution to the primal problem. This is called the weak duality phenomenon. The easy direction (that every cut is a lower bound for every flow) of the famous "max-flow min-cut" is an instance of weak duality.

Theorem (Weak Duality)
For every matching [math]\displaystyle{ M }[/math] and every vertex cover [math]\displaystyle{ C }[/math] for [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math], it holds that [math]\displaystyle{ |M|\le |C| }[/math].
Proof.

If [math]\displaystyle{ M\subseteq U }[/math] is a matching for [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math], then every [math]\displaystyle{ S_i }[/math] intersects with [math]\displaystyle{ M }[/math] on at most one element, which means no two elements in [math]\displaystyle{ M }[/math] can be covered by one [math]\displaystyle{ S_i }[/math], and hence each element in [math]\displaystyle{ M }[/math] will consume at least one distinct [math]\displaystyle{ S_i }[/math] to cover. Therefore, for any set cover, in order to cover all elements in [math]\displaystyle{ M }[/math] must cost at least [math]\displaystyle{ |M| }[/math] sets.

More formally, for any matching [math]\displaystyle{ M }[/math] and set cover [math]\displaystyle{ C }[/math], it holds that

[math]\displaystyle{ |M|=\left|\bigcup_{i\in C}(S_i\cap M)\right|\le \sum_{i\in C}|S_i\cap M|\le |C|, }[/math]

where the first equality is because [math]\displaystyle{ C }[/math] is a set cover and the last inequality is because [math]\displaystyle{ M }[/math] is a matching.

[math]\displaystyle{ \square }[/math]

As a corollary, every matching [math]\displaystyle{ M }[/math] for [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] is a lower bound for the optimal set cover [math]\displaystyle{ OPT }[/math]:

Corollary
Let [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] be an instance for set cover, and [math]\displaystyle{ OPT }[/math] the size of the optimal set cover.
For every matching [math]\displaystyle{ M }[/math] for [math]\displaystyle{ S_1,S_2,\ldots,S_m }[/math], it holds that [math]\displaystyle{ |M|\le OPT }[/math].

Now we are ready to present our algorithm. It is a greedy algorithm in the dual world. And the maximal (local optimal) solution to the dual problem helps us to find a good enough solution to the primal problem.

DualCover
Input: sets [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math];

construct a maximal matching [math]\displaystyle{ M\subseteq U }[/math] such that [math]\displaystyle{ |S_i\cap M|\le 1 }[/math] for all [math]\displaystyle{ i=1,2,\ldots, m }[/math]
by sequentially adding elements to [math]\displaystyle{ M }[/math] until nothing can be added;
return [math]\displaystyle{ C=\{i\mid S_i\cap M\neq\emptyset\} }[/math]

The algorithm constructs the maximal matching [math]\displaystyle{ M }[/math] by sequentially adding elements into [math]\displaystyle{ M }[/math] until reaching the maximality. This obviously takes polynomial time.

It is not so obvious to see that the returned [math]\displaystyle{ C }[/math] is always a set cover. This is due to the maximality of the matching [math]\displaystyle{ M }[/math]:

  • By contradiction, assuming that [math]\displaystyle{ C }[/math] is not a set cover, which means there is an element [math]\displaystyle{ x\in U }[/math] such that for all [math]\displaystyle{ i\in C }[/math], [math]\displaystyle{ x\not\in S_i }[/math], which implies that [math]\displaystyle{ x\not\in M }[/math] and the [math]\displaystyle{ M'=M\cap\{x\} }[/math] is still a matching, contradicting the maximality of [math]\displaystyle{ M }[/math].

Therefore the [math]\displaystyle{ C }[/math] constructed as in the DualCover algorithm must be a set cover.

For the maximal matching [math]\displaystyle{ M }[/math] constructed by the DualCover algorithm, the output set cover is the collection of all sets which contain at least one element in [math]\displaystyle{ M }[/math]. Recall that the frequency of an element [math]\displaystyle{ frequency(x) }[/math] is defined as the number of sets [math]\displaystyle{ S_i }[/math] containing [math]\displaystyle{ x }[/math]. Then each element [math]\displaystyle{ x\in M }[/math] may contribute at most [math]\displaystyle{ frequency(x) }[/math] many sets into the set cover [math]\displaystyle{ C }[/math]. Then it holds that

[math]\displaystyle{ |C|\le \sum_{x\in M}frequency(x)\le f\cdot |M|\le f\cdot OPT, }[/math]

where [math]\displaystyle{ f=\max_{x\in U}frequency(x) }[/math] denotes the maximum frequency of all elements.

We proved the following [math]\displaystyle{ f }[/math]-approximation bound for the DualCover algorithm on set cover instances with maximum frequency [math]\displaystyle{ f }[/math].

Theorem
For any set cover instance [math]\displaystyle{ S_1,S_2,\ldots,S_m\subseteq U }[/math] with optimal set cover of size [math]\displaystyle{ OPT }[/math], the DualCover returns a set cover of size
[math]\displaystyle{ C\le f\cdot {OPT} }[/math],
where [math]\displaystyle{ f=\max_{x\in U}frequency(x)=\max_{x\in U}|\{i\mid x\in S_i\}| }[/math] is the maximum frequency.

When the frequency [math]\displaystyle{ f=2 }[/math], the set cover problem becomes the vertex cover problem. And the DualCover algorithm works simply as follows:

DualCover for vertex cover problem
Input: an undirected graph [math]\displaystyle{ G(V,E) }[/math];

initially [math]\displaystyle{ C=\emptyset }[/math];
while [math]\displaystyle{ E\neq\emptyset }[/math]
pick an arbitrary edge [math]\displaystyle{ uv\in E }[/math] and add both [math]\displaystyle{ u }[/math] and [math]\displaystyle{ v }[/math] to [math]\displaystyle{ C }[/math];
remove all edges in [math]\displaystyle{ E }[/math] incident to [math]\displaystyle{ u }[/math] or [math]\displaystyle{ v }[/math];
return [math]\displaystyle{ C }[/math];

Since this algorithm is just an implementation of the DualCover algorithm on the vertex cover instances (set cover instances with frequency [math]\displaystyle{ f=2 }[/math]), by the analysis of the DualCover algorithm, it is a 2-approximation algorithm for the vertex cover problem.

Ignoring lower order terms, [math]\displaystyle{ 2 }[/math] is also the best approximation ratio achievable by polynomial time algorithms, assuming certain complexity assumption.

  • Dinur and Safra (2005) showed that there is no poly-time algorithm with approximation ratio [math]\displaystyle{ \lt 1.3606 }[/math], assuming that NP[math]\displaystyle{ \neq }[/math]P.
  • Khot and Regev (2008) showed that there is no poly-time algorithm with approximation ratio [math]\displaystyle{ 2-\epsilon }[/math] for any constant [math]\displaystyle{ \epsilon }[/math] assuming the unique games conjecture.

Scheduling

We consider a scheduling problem with the following settings:

  • There are [math]\displaystyle{ n }[/math] jobs to be processed.
  • There are [math]\displaystyle{ m }[/math] identical parallel machines. Each machine can start processing jobs at time 0 and can process at most one job at a time.
  • Each job [math]\displaystyle{ j=1,2,\ldots, n }[/math] must be processed on one of these machines for [math]\displaystyle{ p_j }[/math] time units without interruption. [math]\displaystyle{ p_j }[/math] is called the processing time of job [math]\displaystyle{ j }[/math].

In a schedule each job is assigned to a machine to process starting at some time, respecting the above rules. The goal is to complete all jobs as soon as possible.

Specifically, job [math]\displaystyle{ j }[/math] is completed at time [math]\displaystyle{ C_j }[/math], the objective is to minimize the makespan [math]\displaystyle{ C_{\max}=\max_{j}C_j }[/math].

Minimum Makespan on Identical Parallel Machines (load balancing version)
Input: [math]\displaystyle{ n }[/math] jobs [math]\displaystyle{ j=1,2,\ldots, n }[/math], each with processing time [math]\displaystyle{ p_j\in\mathbb{Z}^+ }[/math];
Output:

Graham's List algorithm

Local Search

Longest Processing Time (LPT)

Online Algorithms and Competitive Ratio