随机算法 (Fall 2011)/Randomized Quicksort: Difference between revisions

From TCS Wiki
Jump to navigation Jump to search
Created page with 'The following is the pseudocode of the famous [http://en.wikipedia.org/wiki/Quicksort Quicksort] algorithm, whose input is a set <math>S</math> of numbers. * if <math>|S|>1</math…'
 
imported>WikiSysop
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
The following is the pseudocode of the famous [http://en.wikipedia.org/wiki/Quicksort Quicksort] algorithm, whose input is a set <math>S</math> of numbers.
Given as input a set <math>S</math> of <math>n</math> numbers, we want to sort the numbers in <math>S</math> in increasing order. One of the most famous algorithm for this problem is the  [http://en.wikipedia.org/wiki/Quicksort Quicksort] algorithm.
* if <math>|S|>1</math> do:
* if <math>|S|>1</math> do:
** pick an element <math>x</math> from  <math>S</math> as the ''pivot'';
** pick an <math>x\in S</math> as the ''pivot'';
** partition <math>S</math> into <math>S_1</math>, <math>\{x\}</math>, and <math>S_2</math>, where all elements in <math>S_1</math> are smaller than <math>x</math> and all elements in <math>S_2</math> are  larger than <math>x</math>;
** partition <math>S</math> into <math>S_1</math>, <math>\{x\}</math>, and <math>S_2</math>, where all numbers in <math>S_1</math> are smaller than <math>x</math> and all numbers in <math>S_2</math> are  larger than <math>x</math>;
** recursively sort <math>S_1</math> and <math>S_2</math>;
** recursively sort <math>S_1</math> and <math>S_2</math>;


The time complexity of this sorting algorithm is measured by the '''number of comparisons'''.   
The time complexity of this sorting algorithm is measured by the '''number of comparisons'''.   


For the '''deterministic''' quicksort algorithm, the pivot element is usually the element in a fixed position (e.g. the first one) of the <math>S</math>. This will make the worst-case time complexity <math>\Omega(n^2)</math>, which means there exists a bad case <math>S</math>, sorting which will cost us <math>\Omega(n^2)</math> comparisons, ''every time''!
For the '''deterministic''' quicksort algorithm, the pivot is picked from a fixed position (e.g. the first number in the array). The worst-case time complexity in terms of number of comparisons is <math>\Theta(n^2)</math>.


It is just so unfair to have an unbeatable input for this brilliant algorithm. So we tweak the algorithm a little bit:
= Algorithm: RandQSort =
=== Algorithm: RandQSort ===
We consider the following randomized version of the quicksort.
* if <math>|S|>1</math> do:
* if <math>|S|>1</math> do:
** ''uniformly'' pick a ''random'' element <math>x</math> from  <math>S</math> as the pivot;
** ''uniformly'' pick a ''random'' <math>x\in S</math> as the pivot;
** partition <math>S</math> into <math>S_1</math>, <math>\{x\}</math>, and <math>S_2</math>, where all elements in <math>S_1</math> are smaller than <math>x</math> and all elements in <math>S_2</math> are  larger than <math>x</math>;
** partition <math>S</math> into <math>S_1</math>, <math>\{x\}</math>, and <math>S_2</math>, where all numbers in <math>S_1</math> are smaller than <math>x</math> and all numbers in <math>S_2</math> are  larger than <math>x</math>;
** recursively sort <math>S_1</math> and <math>S_2</math>;
** recursively sort <math>S_1</math> and <math>S_2</math>;


=== Analysis ===
= Analysis =
Our goal is to analyze the expected number of comparisons during an execution of RandQSort with an arbitrary input <math>S</math>. We achieve this by measuring the chance that each pair of elements are compared, and summing all of them up due to [http://en.wikipedia.org/wiki/Expected_value#Linearity Linearity of Expectation].
Our goal is to analyze the expected number of comparisons during an execution of RandQSort with an arbitrary input <math>S</math>. We achieve this by measuring the chance that each pair of elements are compared, and summing all of them up due to [http://en.wikipedia.org/wiki/Expected_value#Linearity Linearity of Expectation].



Latest revision as of 06:03, 27 August 2011

Given as input a set [math]\displaystyle{ S }[/math] of [math]\displaystyle{ n }[/math] numbers, we want to sort the numbers in [math]\displaystyle{ S }[/math] in increasing order. One of the most famous algorithm for this problem is the Quicksort algorithm.

  • if [math]\displaystyle{ |S|\gt 1 }[/math] do:
    • pick an [math]\displaystyle{ x\in S }[/math] as the pivot;
    • partition [math]\displaystyle{ S }[/math] into [math]\displaystyle{ S_1 }[/math], [math]\displaystyle{ \{x\} }[/math], and [math]\displaystyle{ S_2 }[/math], where all numbers in [math]\displaystyle{ S_1 }[/math] are smaller than [math]\displaystyle{ x }[/math] and all numbers in [math]\displaystyle{ S_2 }[/math] are larger than [math]\displaystyle{ x }[/math];
    • recursively sort [math]\displaystyle{ S_1 }[/math] and [math]\displaystyle{ S_2 }[/math];

The time complexity of this sorting algorithm is measured by the number of comparisons.

For the deterministic quicksort algorithm, the pivot is picked from a fixed position (e.g. the first number in the array). The worst-case time complexity in terms of number of comparisons is [math]\displaystyle{ \Theta(n^2) }[/math].

Algorithm: RandQSort

We consider the following randomized version of the quicksort.

  • if [math]\displaystyle{ |S|\gt 1 }[/math] do:
    • uniformly pick a random [math]\displaystyle{ x\in S }[/math] as the pivot;
    • partition [math]\displaystyle{ S }[/math] into [math]\displaystyle{ S_1 }[/math], [math]\displaystyle{ \{x\} }[/math], and [math]\displaystyle{ S_2 }[/math], where all numbers in [math]\displaystyle{ S_1 }[/math] are smaller than [math]\displaystyle{ x }[/math] and all numbers in [math]\displaystyle{ S_2 }[/math] are larger than [math]\displaystyle{ x }[/math];
    • recursively sort [math]\displaystyle{ S_1 }[/math] and [math]\displaystyle{ S_2 }[/math];

Analysis

Our goal is to analyze the expected number of comparisons during an execution of RandQSort with an arbitrary input [math]\displaystyle{ S }[/math]. We achieve this by measuring the chance that each pair of elements are compared, and summing all of them up due to Linearity of Expectation.

Let [math]\displaystyle{ a_i }[/math] denote the [math]\displaystyle{ i }[/math]th smallest element in [math]\displaystyle{ S }[/math]. Let [math]\displaystyle{ X_{ij}\in\{0,1\} }[/math] be the random variable which indicates whether [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math] are compared during the execution of RandQSort. That is:

[math]\displaystyle{ \begin{align} X_{ij} &= \begin{cases} 1 & a_i\mbox{ and }a_j\mbox{ are compared}\\ 0 & \mbox{otherwise} \end{cases}. \end{align} }[/math]

Elements [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math] are compared only if one of them is chosen as pivot. After comparison they are separated (thus are never compared again). So we have the following observation:

Claim 1: Every pair of [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math] are compared at most once.

Therefore the sum of [math]\displaystyle{ X_{ij} }[/math] for all pair [math]\displaystyle{ \{i, j\} }[/math] gives the total number of comparisons. The expected number of comparisons is [math]\displaystyle{ \mathbf{E}\left[\sum_{i=1}^n\sum_{j\gt i}X_{ij}\right] }[/math]. Due to Linearity of Expectation, [math]\displaystyle{ \mathbf{E}\left[\sum_{i=1}^n\sum_{j\gt i}X_{ij}\right] = \sum_{i=1}^n\sum_{j\gt i}\mathbf{E}\left[X_{ij}\right] }[/math]. Our next step is to analyze [math]\displaystyle{ \mathbf{E}\left[X_{ij}\right] }[/math] for each [math]\displaystyle{ \{i, j\} }[/math].

By the definition of expectation and [math]\displaystyle{ X_{ij} }[/math],

[math]\displaystyle{ \begin{align} \mathbf{E}\left[X_{ij}\right] &= 1\cdot \Pr[a_i\mbox{ and }a_j\mbox{ are compared}] + 0\cdot \Pr[a_i\mbox{ and }a_j\mbox{ are not compared}]\\ &= \Pr[a_i\mbox{ and }a_j\mbox{ are compared}]. \end{align} }[/math]

We are going to bound this probability.

Claim 2: [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math] are compared if and only if one of them is chosen as pivot when they are still in the same subset.

This is easy to verify: just check the algorithm. The next one is a bit complicated.

Claim 3: If [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math] are still in the same subset then all [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] are in the same subset.

We can verify this by induction. Initially, [math]\displaystyle{ S }[/math] itself has the property described above; and partitioning any [math]\displaystyle{ S }[/math] with the property into [math]\displaystyle{ S_1 }[/math] and [math]\displaystyle{ S_2 }[/math] will preserve the property for both [math]\displaystyle{ S_1 }[/math] and [math]\displaystyle{ S_2 }[/math]. Therefore Claim 3 holds.

Combining Claim 2 and 3, we have:

Claim 4: [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math] are compared only if one of [math]\displaystyle{ \{a_i, a_j\} }[/math] is chosen from [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math].

And apparently,

Claim 5: Every one of [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] is chosen equal-probably.

This is because our RandQSort chooses the pivot uniformly at random.

Claim 4 and Claim 5 together imply:

[math]\displaystyle{ \begin{align} \Pr[a_i\mbox{ and }a_j\mbox{ are compared}] &\le \frac{2}{j-i+1}. \end{align} }[/math]
Remark: Perhaps you feel confused about the above argument. You may ask: "The algorithm chooses pivots for many times during the execution. Why in the above argument, it looks like the pivot is chosen only once?" Good question! Let's see what really happens by looking closely.

For any pair [math]\displaystyle{ a_i }[/math] and [math]\displaystyle{ a_j }[/math], initially [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] are all in the same set [math]\displaystyle{ S }[/math] (obviously!). During the execution of the algorithm, the set which containing [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] are shrinking (due to the pivoting), until one of [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] is chosen, and the set is partitioned into different subsets. We ask for the probability that the chosen one is among [math]\displaystyle{ \{a_i, a_j\} }[/math]. So we really care about "the last" pivoting before [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] is split.

Formally, let [math]\displaystyle{ Y }[/math] be the random variable denoting the pivot element. We know that for each [math]\displaystyle{ a_k\in\{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math], [math]\displaystyle{ Y=a_k }[/math] with the same probability, and [math]\displaystyle{ Y\not\in\{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math] with an unknown probability (remember that there might be other elements in the same subset with [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math]). The probability we are looking for is actually [math]\displaystyle{ \Pr[Y\in \{a_i, a_j\}\mid Y\in\{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\}] }[/math], which is always [math]\displaystyle{ \frac{2}{j-i+1} }[/math], provided that [math]\displaystyle{ Y }[/math] is uniform over [math]\displaystyle{ \{a_i, a_{i+1}, \ldots, a_{j-1}, a_{j}\} }[/math].

The conditional probability rules out the irrelevant events in a probabilistic argument.

Summing all up:

[math]\displaystyle{ \begin{align} \mathbf{E}\left[\sum_{i=1}^n\sum_{j\gt i}X_{ij}\right] &= \sum_{i=1}^n\sum_{j\gt i}\mathbf{E}\left[X_{ij}\right]\\ &\le \sum_{i=1}^n\sum_{j\gt i}\frac{2}{j-i+1}\\ &= \sum_{i=1}^n\sum_{k=2}^{n-i+1}\frac{2}{k} & & (\mbox{Let }k=j-i+1)\\ &\le \sum_{i=1}^n\sum_{k=1}^{n}\frac{2}{k}\\ &= 2n\sum_{k=1}^{n}\frac{1}{k}\\ &= 2n H(n). \end{align} }[/math]

[math]\displaystyle{ H(n) }[/math] is the [math]\displaystyle{ n }[/math]th Harmonic number. It holds that

[math]\displaystyle{ \begin{align}H(n) = \ln n+O(1)\end{align} }[/math].

Therefore, for an arbitrary input [math]\displaystyle{ S }[/math] of [math]\displaystyle{ n }[/math] numbers, the expected number of comparisons taken by RandQSort to sort [math]\displaystyle{ S }[/math] is [math]\displaystyle{ \mathrm{O}(n\log n) }[/math].